Anker SOLIX F3800 and Home Power Panel Installation
The F3800 rolls in on wheels. Getting it to run your home's circuits takes the Anker SOLIX Home Power Panel, wired into your main panel by a licensed electrician. That's what we do, permit and inspection included.
How Anker SOLIX home backup fits together
The Anker SOLIX F3800 family are large portable power stations that can also serve as home backup. On their own they power whatever you plug into them. Connected to Anker's Home Power Panel, they can run selected circuits in your home, so the furnace, fridge and lights come back without extension cords running through the house.
The Home Power Panel connects to your main electrical panel and may add a separate backup load center, depending on your setup. That's permitted electrical work in most Colorado jurisdictions, and it's the part we handle.
What we check before installing
- Your main panel's brand, size, open breaker spaces and overall condition.
- Which circuits you want on backup, and whether any of them are 240-volt loads like a well pump.
- Where the F3800 will live and how you'll connect it, so it's easy to reach in an outage.
- Whether you have rooftop solar already, since that changes how the system should be wired.
- What your city or county building department requires for the permit.
Already have rooftop solar?
Combining a portable power station with an existing grid-tied solar system has to be designed carefully so the two don't fight each other and nothing feeds power onto the grid during an outage. We look at your inverter and the way your solar is connected before recommending a wiring approach. Any change to a grid-tied solar system generally needs approval from your utility, which is Xcel Energy for most of the Front Range.
If you don't have solar, we can add panels that charge the F3800 directly, sized to what it accepts.
Our Anker SOLIX install process
- 01
Site visit
Panel review, circuit selection and a plan for where the F3800 and Home Power Panel go.
- 02
Permit
We file with your city or county building department.
- 03
Install
We mount and wire the Home Power Panel, move the selected circuits and connect the inlet for your F3800.
- 04
Inspection and handoff
We pass inspection, test switchover and walk you through using the system and Anker's app.
About this page
We install and integrate Anker SOLIX equipment that you've chosen or already own. We aren't an Anker SOLIX-certified installer or authorized dealer, and we don't sell Anker SOLIX products. We're certified with Enphase, Tesla Powerwall, FranklinWH and EG4. Anker SOLIX is a trademark of its owner and is used here only to describe the equipment we install.
Warranty
Our 10-year workmanship warranty covers the electrical work we do: the panel, transfer equipment, wiring and any solar we install. The equipment itself is covered by the manufacturer's warranty. We're rated 4.8 on Google.
Anker SOLIX installation in Denver, Colorado Springs, Northern Colorado and Summit County
We install and integrate home batteries across the Front Range and Summit County. Battery backup pages for some of the cities we serve:
Denver Metro
Boulder and Northern Colorado
Colorado Springs area
Frequently asked questions
